prikaz prve stranice dokumenta The Effect of Y3+ Addition on Morphology, Structure, and Electrical Properties of Yttria-Stabilized Tetragonal Zirconia Dental Materials
  Preuzmi
PDF 7.09 MB
Znanstveni rad - Izvorni znanstveni rad
The Effect of Y3+ Addition on Morphology, Structure, and Electrical Properties of Yttria-Stabilized Tetragonal Zirconia Dental Materials
Materials, 15 (2022), 5; 1800. https://doi.org/10.3390/ma15051800
Jakovac, Marko; Klaser, Teodoro; Bafti, Arijeta; Skoko, Željko; Pavić, Luka; Žic, Mark

Citirajte ovaj rad

Jakovac, M., Klaser, T., Bafti, A., Skoko, Ž., Pavić, L. i Žic, M. (2022). The Effect of Y3+ Addition on Morphology, Structure, and Electrical Properties of Yttria-Stabilized Tetragonal Zirconia Dental Materials. Materials, 15. (5). doi: 10.3390/ma15051800

Jakovac, Marko, et al. "The Effect of Y3+ Addition on Morphology, Structure, and Electrical Properties of Yttria-Stabilized Tetragonal Zirconia Dental Materials." Materials, vol. 15, br. 5, 2022. https://doi.org/10.3390/ma15051800

Jakovac, Marko, Teodoro Klaser, Arijeta Bafti, Željko Skoko, Luka Pavić i Mark Žic. "The Effect of Y3+ Addition on Morphology, Structure, and Electrical Properties of Yttria-Stabilized Tetragonal Zirconia Dental Materials." Materials 15, br. 5 (2022). https://doi.org/10.3390/ma15051800

Jakovac, M., et al. (2022) 'The Effect of Y3+ Addition on Morphology, Structure, and Electrical Properties of Yttria-Stabilized Tetragonal Zirconia Dental Materials', Materials, 15(5). doi: 10.3390/ma15051800

Jakovac M, Klaser T, Bafti A, Skoko Ž, Pavić L, Žic M. The Effect of Y3+ Addition on Morphology, Structure, and Electrical Properties of Yttria-Stabilized Tetragonal Zirconia Dental Materials. Materials [Internet]. 27.02.2022. [pristupljeno 03.12.2024.];15(5). doi: 10.3390/ma15051800

M. Jakovac, T. Klaser, A. Bafti, Ž. Skoko, L. Pavić i M. Žic, "The Effect of Y3+ Addition on Morphology, Structure, and Electrical Properties of Yttria-Stabilized Tetragonal Zirconia Dental Materials", Materials, vol. 15, br. 5, Veljača 2022. [Online]. Dostupno na: https://urn.nsk.hr/urn:nbn:hr:217:714006. [Citirano: 03.12.2024.]

Za citiranje koristite ovu mrežnu adresu: https://urn.nsk.hr/urn:nbn:hr:217:714006
Prijavite se u repozitorij kako biste mogli spremiti objekt u svoju listu.
Podaci o radu
Naslov (engleski)The Effect of Y3+ Addition on Morphology, Structure, and Electrical Properties of Yttria-Stabilized Tetragonal Zirconia Dental Materials
AutorMarko Jakovac
AutorTeodoro Klaser
AutorArijeta Bafti
AutorŽeljko Skoko
AutorLuka Pavić
AutorMark Žic
Autorova ustanovaSveučilište u Zagrebu
Prirodoslovno-matematički fakultet
(Fizički odsjek)
Znanstveno / umjetničko
područje, polje i grana		PRIRODNE ZNANOSTI
Fizika
Sažetak (engleski)
Zirconia (ZrO2), a widely known material with an extensive range of applications, is especially suitable for dental applications. This kind of dental material is produced in the form of blocks or discs (mostly discs—depending on CAD/CAM machines) by cold isostatic pressing (CIP). Such discs are subsequently milled by CAM/CAD technology into a desirable form. Due to the application of CIP, the resulting discs consist of different yttria-stabilized tetragonal zirconia polycrystal (Y-TZP) powders, additives and pigments. The diverse composition of the discs (e.g., different Y3+ content) governs material properties, such as hardness, toughness and translucence. The aim of this work was to investigate the impact of Y3+ addition on the grains and grain boundaries, on the ZrO2 phases lattice parameter values and on the electrical equivalent circuit parameters of the prepared Y-TZP samples. The disc-shaped samples were prepared by using CAM/CAD technology. It was observed that the grain size and the grain density were increased by Y3+ addition. The sample with the lowest Y3+ content was characterized by the highest portion of the tetragonal phase, whilst the disc with the highest Y3+ addition consisted mainly of the cubic phase. It was also observed that at the higher Y3+ ion concentrations, these ions mainly incorporated the tetragonal phase. Furthermore, conductivity investigations showed that the resistivity of the grains in the samples with the higher Y3+ concentrations was decreased as these ions were mainly trapped in the grain boundary. On the other hand, the Y3+ trapping increased the capacitance of the grain boundary.
Ključne riječi (engleski)
Jezikengleski
Vrsta publikacijeZnanstveni rad - Izvorni znanstveni rad
Status objaveObjavljen
Vrsta recenzijeRecenziran - međunarodna recenzija
Verzija publikacijeObjavljena verzija rada (izdavačev PDF)
Naslov časopisaMaterials
Brojčani podacivol. 15, br. 5, 1800
e-ISSN1996-1944
DOIhttps://doi.org/10.3390/ma15051800
URN:NBNurn:nbn:hr:217:714006
Datum objave publikacije2022-02-27
ProjektŠifra: KK.01.1.1.02.0013
Naziv (hrvatski): Centar za Napredna Istraživanja Kompleksnih Sustava
Naziv (engleski): Centre for Advanced Research of Complex Systems
Kratica: CeNIKS
Voditelj: Mihael Srđan Grbić
Pravna nadležnost: eu
Financijer: Europska komisija
Linija financiranja: European Regional Development Fund
URL dokumentahttps://www.mdpi.com/1996-1944/15/5/1800
Vrsta resursaTekst
Prava pristupaOtvoreni pristup
Uvjeti korištenjaIkona licence Imenovanje 4.0 međunarodna (CC BY 4.0)
Javna napomena© 2022 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https://creativecommons.org/licenses/by/4.0/). Received: 9 February 2022; Accepted: 22 February 2022; Published: 27 February 2022.
Datum i vrijeme pohrane2024-08-31 19:38:31