prikaz prve stranice dokumenta The Impact of In Situ Polymerization Conditions on the Structures and Properties of PANI/ZnO-Based Multiphase Composite Photocatalysts
  Preuzmi
PDF 7.28 MB
Znanstveni rad - Izvorni znanstveni rad
The Impact of In Situ Polymerization Conditions on the Structures and Properties of PANI/ZnO-Based Multiphase Composite Photocatalysts
Catalysts, 10 (2020), 4; 400. https://doi.org/10.3390/catal10040400
Gilja, Vanja; Živković, Ivana; Klaser, Teodoro; Skoko, Željko; Kraljić Roković, Marijana; Hrnjak-Murgić, Zlata; Žic, Mark

Citirajte ovaj rad

Gilja, V., Živković, I., Klaser, T., Skoko, Ž., Kraljić Roković, M., Hrnjak Murgić, Z. i Žic, M. (2020). The Impact of In Situ Polymerization Conditions on the Structures and Properties of PANI/ZnO-Based Multiphase Composite Photocatalysts. Catalysts, 10. (4). doi: 10.3390/catal10040400

Gilja, Vanja, et al. "The Impact of In Situ Polymerization Conditions on the Structures and Properties of PANI/ZnO-Based Multiphase Composite Photocatalysts." Catalysts, vol. 10, br. 4, 2020. https://doi.org/10.3390/catal10040400

Gilja, Vanja, Ivana Živković, Teodoro Klaser, Željko Skoko, Marijana Kraljić Roković, Zlata Hrnjak Murgić i Mark Žic. "The Impact of In Situ Polymerization Conditions on the Structures and Properties of PANI/ZnO-Based Multiphase Composite Photocatalysts." Catalysts 10, br. 4 (2020). https://doi.org/10.3390/catal10040400

Gilja, V., et al. (2020) 'The Impact of In Situ Polymerization Conditions on the Structures and Properties of PANI/ZnO-Based Multiphase Composite Photocatalysts', Catalysts, 10(4). doi: 10.3390/catal10040400

Gilja V, Živković I, Klaser T, Skoko Ž, Kraljić Roković M, Hrnjak Murgić Z, i sur.. The Impact of In Situ Polymerization Conditions on the Structures and Properties of PANI/ZnO-Based Multiphase Composite Photocatalysts. Catalysts [Internet]. 05.04.2020. [pristupljeno 03.12.2024.];10(4). doi: 10.3390/catal10040400

V. Gilja, et al., "The Impact of In Situ Polymerization Conditions on the Structures and Properties of PANI/ZnO-Based Multiphase Composite Photocatalysts", Catalysts, vol. 10, br. 4, Travanj 2020. [Online]. Dostupno na: https://urn.nsk.hr/urn:nbn:hr:217:958662. [Citirano: 03.12.2024.]

Za citiranje koristite ovu mrežnu adresu: https://urn.nsk.hr/urn:nbn:hr:217:958662
Prijavite se u repozitorij kako biste mogli spremiti objekt u svoju listu.
Podaci o radu
Naslov (engleski)The Impact of In Situ Polymerization Conditions on the Structures and Properties of PANI/ZnO-Based Multiphase Composite Photocatalysts
AutorVanja Gilja
AutorIvana Živković
MBZ: 362546
AutorTeodoro Klaser
AutorŽeljko Skoko
AutorMarijana Kraljić Roković
AutorZlata Hrnjak-Murgić
AutorMark Žic
Autorova ustanovaSveučilište u Zagrebu
Prirodoslovno-matematički fakultet
(Fizički odsjek)
Znanstveno / umjetničko
područje, polje i grana		PRIRODNE ZNANOSTI
Fizika
Znanstveno / umjetničko
područje, polje i grana		PRIRODNE ZNANOSTI
Kemija
Sažetak (engleski)
We have synthesized polyaniline/ZnO-based (PANI/ZnO) multiphase composite photocatalysts from acid media by a newly proposed two-step in situ polymerization. The first step of synthesis yielded PANI salt required for the PANI/ZnO synergistic effect. In the second step, the aniline oxidation continued, without ZnO dissolution, and it produced PANI base. Thus, both PANI salt and base phases in the composites were detected by FTIR and UV/Vis, while the presence of both ZnO and PANI polymer was confirmed by XRD. Additionally, XRD also showed Zn5(OH)8(NO3)2·2H2O and Zn(SO4)(H2O) phases in PANI/ZnO-based multiphase composites. Furthermore, the impact of the synthesis conditions on the morphology of the composites was investigated by FE-SEM. The images displayed that ZnO particles were encapsulated in PANI sheets that were formed by the aniline oligomers. Photocatalytic evaluation of PANI/ZnO-based catalysts (i.e., degradation of Acid Blue 25 dye) was conducted and the obtained results confirmed that all the studied composites experienced the PANI/ZnO synergistic effect. It was observed that the best photocatalytic properties were held by the PANI/ZnO_2 sample due to its optimal particle size.
Ključne riječi (engleski)
Jezikengleski
Vrsta publikacijeZnanstveni rad - Izvorni znanstveni rad
Status objaveObjavljen
Vrsta recenzijeRecenziran - međunarodna recenzija
Verzija publikacijeObjavljena verzija rada (izdavačev PDF)
Naslov časopisaCatalysts
Brojčani podacivol. 10, br. 4, 400
p-ISSN2073-4344
DOIhttps://doi.org/10.3390/catal10040400
URN:NBNurn:nbn:hr:217:958662
Datum objave publikacije2020-04-05
ProjektŠifra: IP-2013-11-5092
Naziv (hrvatski): Razvoj fotokatalitičkih polimernih nanokompozita za obradu otpadnih voda
Kratica: DePoNPhoto
Voditelj: Zlata Hrnjak-Murgić
Pravna nadležnost: Hrvatska
Financijer: HRZZ
Linija financiranja: IP
URL dokumentahttps://www.mdpi.com/2073-4344/10/4/400
Vrsta resursaTekst
Prava pristupaOtvoreni pristup
Uvjeti korištenjaIkona licence Imenovanje 4.0 međunarodna (CC BY 4.0)
Javna napomena© 2020 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (http://creativecommons.org/licenses/by/4.0/). Received: 28 February 2020. Revised: 31 March 2020. Accepted: 2 April 2020. Published: 5 April 2020.
Datum i vrijeme pohrane2020-08-27 20:42:27